 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CRYSTAL CLOCK OSCILLATORS CMOS (TTL Compatible) Data Sheet 0021C Rev. D SJ-460 Series Description The SJ-460 Series of quartz crystal oscillators are designed to survive standard wave soldering operations without damage. Features * Wide frequency range-2.25MHz to 36.0MHz * User specified tolerance available * Will withstand vapor phase temperatures of 253C for 4 minutes maximum * Space-saving alternative to discrete component oscillators * High shock resistance, to 3000g * Metal lid electrically connected to ground to reduce EMI Electrical Connection Pin 1 2 3 4 Connection N.C. Ground Output VDD * Low Jitter * CMOS and TTL output levels * High Q Crystal actively tuned oscillator circuit * Low power consumption * Power supply decoupling internal * No internal PLL avoids cascading PLL problems * High frequencies due to proprietary design * Gold plated leads 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com CRYSTAL CLOCK OSCILLATORS SJ-460 Series Continued CMOS (TTL Compatible) Operating Conditions and Output Characteristics Electrical Characteristics Parameter Frequency Duty Cycle Logic 0 Logic 1 Rise & Fall Time Jitter, RMS(2) Frequency Stability (1) Symbol --------VOL VOH tr,tf ----dF/F Conditions ----@ VDD/2 @ 600A @ 16mA @ 600A @ 16mA 10-90%VO ----Overall conditions including: voltage, calibration, temp., 10 yr aging, shock, vibration Min 2.25MHz 45/55% --------VDD-0.2V VDD-0.4V ---------100ppm Data Sheet 0021C Rev. D Typical ------------------------------------- Max 36.0MHz 55/45% 0.2V 0.4V --------3 ns 8.0 psec +100ppm General Characteristics Parameter Supply Voltage Supply Current Output current Operating temperature Storage temperature Power Dissipation Lead temperature Load Start-up Time Symbol VDD IDD IO TA TS PD TL ----ts Conditions ----No Load ----------------Soldering, 10 sec. ----<20MHz 20MHz or greater Min 4.5V 0.0 mA 0.0 mA 0C -55C --------------------Typical 5.0V ------------------------------------Max 5.5V 30 mA 16.0 mA 70C 125C 210 mW 300C 15pf 2 ms 10 ms Environmental and Mechanical Characteristics Mechanical Shock Thermal Shock Vibration Soldering Condition Hermetic Seal Per MIL-STD-202, Method 213, Condition E Per MIL-STD-833, Method 1011, Condition A 0.060" double amplitude 10 Hz to 55 Hz, 35g's 55Hz to 2000 Hz 300C for 10 seconds Leak rate less than 1 x 10-8 atm.cc/sec of helium Footnotes: 1) Standard frequency stability (20,25,50ppm & others available) 2) Jitter performance is frequency dependent. Please contact factory for full characterization. Test Load: Creating a Part Number SJ - A46X - FREQ Package Code SJ 4 J Lead SMD Tolerance/Performance 0 100ppm 0-70C 1 50ppm 0-70C 7 25ppm 0-70C 9 Customer Specific A 20ppm 0-70C B 50ppm -40 to +85C C 100ppm -40 to +85C Input Voltage Code Specification A 3.3V 5V 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com |
Price & Availability of SJ-A467
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |